Getting Started with Your Unit
Optical Test Head 39
Working With Your Unit for the First Time
12c. If there are updates available, click the Update button to start the
process. The unit will restart automatically at the end.
12d.Wait for your unit to be ready (its (System) LED will be
steady green), and then connect again to the Web application.
Note: The complete update operation may take a few minutes to complete.
Note: After a successful connection between FMS and your unit, FMS will provide
the updates if your unit is running a compatible version.
13. Select the operating mode as follows:
13a.From the list, select Operating mode.
To Next Page
Loading...
