EXFO OTH-7000 - Restoring Your Unit to Normal Operation

Troubleshooting
52 OTH-7000
Restoring Your Unit to Normal Operation
Restoring Your Unit to Normal Operation
If you ever encounter major problems with your unit (for example, the unit
does not behave the way it used to), you can revert it to its initial state (as it
was at time of purchase).
When you reset your unit to its factory settings:
³ All data files will be lost once the operation is complete.
³ If you have installed products and updates since you purchased your
unit, you will have to reinstall them.
You can perform this operation from the Nova Fiber application or
manually, especially if you cannot access the Nova Fiber application.
CAUTION
DO NOT TURN OFF your unit while the recovery operation is
underway. Doing so may severely damage your unit. Damaged units
will need to be sent back to EXFO for repair.