Extel WEAT V2 N - Kit Contents

WEAT V2 N - V1
8GB
A - 1 worm gear with 6 m of cables
B - 1 worm gear with 2 m of cables
C - 4 mounting brackets + 1 set of keys (for disengaging the gate)
D - 1 control box.
E - 2 four-channel remote controls
F - 1 flashing beacon (to be positioned on post so as to be visible from street).
G - 1 set of photocells (position 40 cm max. from bottom of post).
H - 1 lighting module (required to light the gate’s path of movement). This “lighting system” module
must be obligatorily installed in a CLASS II, IP44 electrical cabinet.
I - 1 operator control relay powered by a 12 V supply from a door phone (connect the red and black
wires on the 12 V door phone control and the 2 white wires on the operator board’s auxiliary
control).
J - 2 Sets of internal stops (modular), 11 similar and 1 smaller per set.
options (not supplied):
©m[Wj[cJP{w{{y
©m[WjYYHP{y~
©m[YWYlMFFFHP{{{xwz
©m[WjXjXHPxwyxw{~wz{|m[NGGGX_iwzWjYhH
©m[WjWdHP{{ww{w|{{z{zw}{
©m[Wj[hIPm[Wj[cI{{ywz{GHlZYBHCy~w{wz{y{{
©m[WjZjNFIFGP{xw{{>H?D
2. KIT CONTENTS
D EF GHI J
C
A
B