43
d) If the interior is dirty, use the equipped tool to
scrape the deposited ashes and then remove
them by using a vacuum cleaner (Fig.26).
Insert the mobile firewall again, fixing it with
the two screws/bolts, taking care not to
damage the ring.
e) Monthly, or whenever necessary, we suggest
to provide for a complete cleaning of the
combustion chamber. To do this, unscrew the
four screws on the side of the chamber wall
(Fig.27) and remove it (Fig.28)
Now scrape as described before by using
the equipped tool and then vacuum all the
deposited ashes between the stainless steel
tubes (Fig.29)
f) Duly clean the holes of the burn pot with the
equipped tool, vacuum everything and the
insert it. We recommend carrying out this
operation every day.
g) The positioning of the insulating rings on the
door guarantees the tightness of the stove
and its correct operation. It is necessary for
to check the rings periodically.
If they are damaged, they must be changed
by our authorised dealer . (See fig. 30)
NB.:
For a correct functioning , the stove need an
ordinary maintenance at least once a year by
our authorized dealer.
If the electrical cord is damaged, it must be
replaced by the authorized dealer or by a
special technician, in order to avoid any risk.
fig. 30
fig. 29
fig. 28
fig. 27
fig. 26
To Next Page
Loading...
Need help?
General
