Extreme Networks ExtremeWireless AP3935i - Configuring AP3935 e Channel Settings

12 Configuring AP3935e Channel Settings
Configuring AP3935e Channel Settings
TheAP3935emustbeins talledbyaprofessionalinstaller.Beforestartingtheinstallation,the
installerneedstodetermineandconfigurethefollowing:
• DeterminetheAntennaModel
• ConfigureRadioRFPort
• ConfigureRadioChannel
• ConfigureRadioTransmit(Tx)Power
Determine the Antenna Model
Theprofessionalinstallerneedstodetermineantennamodelsandthenumberofantennaportsfor
thatmodel.Thenumberofportscanbedeterminedfromvisualinspectionoftheantennaorfrom
theantennamodel.Forinformationaboutantennamodels,seeCertifiedExternalAntennasfor
AP3935e,Table A‐4onpage
24.
Configure Radio RF Port
TheprofessionalinstallerconfiguresRadioRFportswhereantennaportswillbeconnected.
ToConfigureRadioRFPortsthroughtheExtremeWirelessAssistant
1. LogintotheWirelessAssistant.
2. Fromthetopmenu,clickAP.TheWirelessAPscreenisdisplayed.
3. SelectAPsintheleftpane,thenintheWirelessAPlist,click
theWirelessAPwhoseproperties
youwanttomodify.TheAPPropertiestabdisplaysWirelessAPinformation.