Extreme Networks ExtremeWireless AP3935i User Manual

ExtremeWireless™ AP3935 Installation Guide 19
A
Specifications
ThisappendixliststhespecificationsfortheAP3935iandAP3935eaccesspointsandanexternal
12VDCpowersupply.
External Power Supplies
AP3935APsmaybepoweredbyIEEE802.3afcompliantPoEcablesconnectedtotheEthernet
portsintheconnectorbay.Thisisusuallythepreferredmethodofpoweringforusersthatplanto
mountthedevicesonceilingsorhighuponwalls.YoucanalsopowertheseAPswithoptional,

certified,externalpowersupplies.
Table A-1 Specifications for the AP3935i and AP3935e
Item Specification
Enclosure material Metal base, plastic cap
Power source PoE 802.3at for full performance; (802.3af for low
performance mode) DC power supply.
Power consumption 20W (Max.) 17.0W
(Average)
Outside dimensions (max) Length: 215 mm (8.46”)
Width: 215 mm (8.46”)
Thickness (not including mounting bracket):
AP3935i
: 56 mm (2.2”)
AP3935e: 57 mm (2.23”)
Antenna (AP3935i only) 8 ports: 4 (Radio1) ports (5GHz antenna), 4 (Radio 2) ports
(2.4GHz antenna)
Uplink Interface GbE Ethernet x1 with PoE
RoHS compliant Yes
Radio Configuration Dual Band Dual Concurrent 802.11ac and 802.11n
Radio 1 IEEE 802.11ac, 5GHz, 4x4:4 MU-MIMO, 20/40/
80MHz channel (up to 1733 Mbps per radio)
Radio 2 IEEE 802.11n, 2.4GHz, 4x4:4, MCS8, MCS9, 20/
40MHz channel (up to 800 Mbps per radio)
Operating temperature 32
o
F to 122
o
F (0
o
C to +50
o
C)

Extreme Networks ExtremeWireless AP3935i Specifications

General

Brand	Extreme Networks
Model	ExtremeWireless AP3935i
Category	Wireless Access Point
Language	English