26 ExtremeWireless AP3935i and AP3935e
•Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,
pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide reasonableprotection
againstharmfulinterference
whentheequipmentisoperatedinacommercialenvironment.This
equipmentgenerates,uses,andcanradiateradiofrequencyenergy,and,ifnotinstalledandused
inaccordancewiththeinstructionmanual,maycauseharmfulinterferencetoradio
communications.Operationofthisequipmentinaresidentialareaislikelytocauseharmful
interferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.
USA Conformance Standards
Thisequipmentmeetsthefollowingconformancestandards:
Safety
•UL60950‐1
EMC
•FCCCFR47Part15,ClassB
Radio transceiver
•CFR47Part15.247,SubpartC
•CFR47Part15.407,SubpartE
Other
• IEEE802.11ac(5GHz)
• IEEE802.11b/g(2.4GHz)
• IEEE802.11n
• IEEE802.3at(PoE)
• IEEE802.3af(PoE)
Warning
The ExtremeWireless AP3935 must be installed and used in strict accordance
with the manufacturer's instructions as described in this guide and related
documentation for the device to which the ExtremeWireless AP3935 is
connected. Any other installation or use of the product violates FCC Part 15
regulations.
This Part 15 radio device operates on a non-interference basis with other
devices operating at the same frequency when using the antennas provided or
other Extreme Networks-certified antennas. Any changes or modifications to
the product not expressly approved by Extreme Networks could void the user's
authority to operate this device.
For the product available in the USA market, only channels 1 to 11 can be
operated. Selection of other channels in the 2.4 GHz band is not possible.
To Next Page
Loading...
Need help?
General
