Extreme Networks ExtremeWireless AP560h - Page 21

2. Attach the MBO-ART02 to the access point using two M6 hex-head screws.
Use the mounting holes shown in Figure 4 to mount the MBO-ART02 bracket onto
the AP560h access point.
Figure 4: Attach the MBO-ART02 bracket to the AP560h access point
3. Align the mounting holes on the MBO-ART02 articulating mounting bracket against
the holes on the wall and attach the bracket using four M6 hex-head screws.
Install the Access Point
Install the Access Point on a Wall Using MBO-ART02
Articulating Mounting Bracket
ExtremeWireless™ AP560h Access Point 21