Extreme Networks ExtremeWireless AP560h - Page 31

Figure 10: Pole part of the KT-147407-02 bracket
Procedure
1. Attach the KT-147407-02 at part and 1-axis tilt part to the access point.
For instructions on how to attach the bracket parts, see Install the at part and the
1-axis tilt part of the KT-147407-02 bracket to the access point.
Install the Access Point
Install the Access Point on a Pole Using KT-147407-02
Bracket Parts
ExtremeWireless™ AP560h Access Point 31