Extreme Networks Summit X150 Series - Connecting a Summitstack 64 G Stacking Cable

Connecting Stacking Cables
Summit Family Switches Hardware Installation Guide
225
Connecting a SummitStack 64G Stacking Cable
SummitStack 64G cables are used to connect the 64-Gbps stacking ports on the VIM2-SummitStack128
module in Summit X480 series switches.
Because of the weight of the SummitStack 64G cable, Extreme Networks strongly recommends the use
of cable management hardware to support the cables and provide strain relief at the connectors.
Figure 166 and Figure 167 show representative types of cable management hardware. Your particular
rack configuration may require other cable management solutions.
Figure 166: Cable Management Using a J-Shaped Support Bracket
Figure 167: Cable Management Using Tie-Wraps and Stand-Offs
SH_166
SH_167