Summit X430 Series Switches
Summit Family Switches Hardware Installation Guide
53
Summit X430 Series Switch LEDs
Table 16 describes the meanings of the LEDs on the Summit X430 series switches.
Table 13: LEDs on the Summit X430 Series Switches
Label or Type Color/State Meaning
Front Panel
MGMT Blinking green Power-on self-test (POST) in progress.
Steady green POST passed. Normal operation.
Blinking amber System is disabled. POST failed or system overheated.
Off No external power attached.
FAN Steady green Normal operation, fan is good.
Blinking amber Fan failure. Switch will continue to operate unless it overheats.
Off No power
PSU Steady green Normal operation.
Steady amber Power is attached, but no power is on.
Blinking amber Power failure.
Off No power is attached.
Port number
1 – 24 or
1 – 48
Steady green Link is OK.
Blinking green Port is transmitting packets.
Off Link is not present, or port is disabled.
Port number
21 – 24 or
45 – 48
(Shared ports)
Steady green Link is OK.
Blinking green Port is transmitting packets.
Off Link is not present, or port is disabled.
Port number
25 – 28 or
49 – 52
(SFP+ ports)
Steady green Link is OK.
Blinking green Port is transmitting packets.
Off Link is not present, or port is disabled.
To Next Page
Loading...
