Extreme Networks Summit X150 Series - Installing the Replacement Power Supply

Replacing a Summit 300 W DC Power Supply
Summit Family Switches Hardware Installation Guide
355
5 Carefully slide the power supply the rest of the way out of the switch.
Installing the Replacement Power Supply
To install a replacement Summit 300 W DC power supply:
1 Verify that the power supply is right side up (see Figure 297 and Figure 298)
2 Carefully slide the power supply all the way into the power supply bay (see Figure 297 and
Figure 298). Push the power supply in until the latch snaps into place.
CAUTION
Do not slam the power supply into the switch.
Figure 295: Removing a Summit 300 W DC
Power Supply (Model 10934A)
Figure 296: Removing a Summit 300 W DC
Power Supply (Model 10933)
Figure 297: Installing a Summit 300 W DC
Power Supply (Model 10934A)
Figure 298: Installing a Summit 300 W DC
Power Supply (Model 10933)
SH_212
SH_208