Extreme Networks Summit X150 Series - Summit X350 Series Switch Leds

Summit X350 Series Switches
Summit Family Switches Hardware Installation Guide
49
Summit X350 Series Switch LEDs
Table 29 describes the meanings of the LEDs on the Summit X350 series switches.
Table 12: LEDs on the Summit X350 Series Switches
Label or Type Color/State Meaning
Front Panel
MGMT Blinking green (fast) Power-on self-test (POST) in progress.
Steady green POST passed. System is booting image.
Blinking green
(slow)
Normal operation
Blinking amber Switch diagnostics are running.
or
System is disabled. POST failed or system overheated.
FAN Steady green Normal operation
Blinking amber Failure
Off No power
PSU-I
(Internal power supply)
Steady green Normal operation
Blinking amber Failure
Off No power
PSU-E
(External power supply)
Steady green Normal operation
Blinking amber Failure
Off No external power attached.
Front-panel Port LEDs
Ethernet Ports
1 – 24 or 1 – 48 (21 – 24
and 45 – 48 are shared
ports)
Steady green Link OK
Blinking green Activity
Off Link is not present.
or
Port is disabled.
Rear Panel
Management Port Steady green Link OK
Blinking green Activity
Off Link is not present.
SFP+ 10G Port
(on installed option card)
Steady green Link OK
Blinking green Activity
Off Link down
XFP 10G Port
(on installed option card)
Steady green Link OK
Blinking green Activity
Off Link down