Chapter 6: Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
234
To rack-mount a Summit switch:
1 Place the switch upright on a stable work surface.
2 Place a mounting bracket over the mounting holes on one side of the unit.
3 Insert the screws and fully tighten with a suitable screwdriver, as shown in Figure 172.
Figure 172: Attaching the Mounting Bracket
4 Repeat steps 2 and 3 for the other side of the switch.
5 Slide the switch into the rack (Figure 173).
● Take care to load the rack so that it is not top-heavy. Start installing equipment at the bottom of
the rack and work up.
● Do not cover vents that would restrict airflow. Leave half a rack space between the units for
adequate ventilation.
Figure 173: Installing a Switch in a Rack
‘
6 Secure the switch with suitable screws (not provided).
3
4
3
6
3
5
3
8
3
7
4
0
3
9
4
2
4
1
4
4
4
3
4
64
8
4
5
4
7
5
0
4
9
5
0X
4
9X
SH_245_S150
S450_007
Summit X350, X440, X450,
X450a, and X450e, series
Summit X150 and X250e series
SH_236_X450
To Next Page
Loading...
