Installing AC Power Supplies in Summit X460 Series Switches
Summit Family Switches Hardware Installation Guide
249
Figure 189: Connecting the Power Cord
c Open the clip and slip it over the barrel of the connector (Figure 190).
Figure 190: Attaching the Power Cord Retainer
d Snap the clip firmly around the connector.
5 Connect the other end of the power cord to an AC power outlet.
WARNING!
Always be sure that the source outlet is properly grounded before plugging the AC power cord into the
AC power supply.
To install a second power supply, repeat steps 1 through 5.
SH_228
SH_229
To Next Page
Loading...
