Chapter 6: Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
294
The Summit X670 series switch is shipped without installed power supplies. You can install one or two
power supplies. After the switch is secured to the rack, install the necessary power supplies for your
configuration. For instructions, see the following pages:
● Installing a 450 W or 550 W AC power supply: page 265
● Installing a 450 W or 550 W DC power supply: page 268
NOTE
If you are installing a VIM4 module in the Summit X670V-48x switch, install it in the switch before you
connect the switch to power (see page 336).
To Next Page
Loading...
