Summit X150 Series Switches
Summit Family Switches Hardware Installation Guide
417
Summit X150-24t Power
Operational voltage range 90 to 264 V
Nominal input ratings 100 to 240 V , 50/60 Hz, 1.0 A
Input current 0.5 A @ 115 V (low-line)
0.25 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Inrush current 30 A @ 115 V, 60 A @ 230 V
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to .
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Efficiency 83% with 60% to 100% load
Heat dissipation (Watts, BTU) 36 W (122.8 BTU/hr)
Power consumption (Watts, BTU) 36 W (122.8 BTU/hr)
Summit X150-24p Power
Operational voltage range 90 to 264 V
Nominal input ratings 100 to 240 V , 50/60 Hz, 5.5 A
Input current (without PoE 0.75 A @ 115 V (low-line)
0.5 A @ 230 V (high-line)
Input current (with PoE full load) 4.4 A @ 115 V (low-line)
2.2 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Inrush current 30 A @ 115 V, 60 A @ 230 V
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to “Power Cord Requirements for AC-Powered Switches and AC
Power Supplies” on page 500.
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Efficiency 81% with 60% to 100% load
Heat dissipation (Watts, BTU) 60 W (204.7 BTU/hr
Power consumption (Watts, BTU) 500 W (1706 BTU/hr)
Table 80: Summit X150 Series Switch Technical Specifications (Continued)
To Next Page
Loading...
