Extreme Networks Summit X150 Series - Page 419

Summit X150 Series Switches
Summit Family Switches Hardware Installation Guide
419
Country-specific VCCI Class A (Japan Emissions)
AS/NZS 3548 ACA (Australia Emissions)
CNS 13438:1997 Class A (BSMI-Taiwan)
MIC Mark, EMC Approval (Korea)
Telecom Standards
ETSI EN 300 386:2001 (EMC Telecommunications)
ETSI EN 300 019 (Environmental for Telecommunications)
IEEE 802.3 Media Access
Standards
IEEE 802.3ab 1000BASE-T
Environmental Data
Environmental Standards EN/ETSI 300 019-2-1 v2.1.2 - Class 1.2 Storage
EN/ETSI 300 019-2-2 v2.1.2 - Class 2.3 Transportation
EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational
EN/ETSI 300 753 (1997-10) - Acoustic Noise
ASTM D3580 Random Vibration Unpackaged 1.5G
Operating conditions Temperature range: 0° C to 40° C (32° F to 104° F)
Humidity: 95% relative humidity, non-condensing
Altitude: 0 to 3,000 meters (9,850 feet)
Shock (half sine): 30 m/s
2
(3 G), 11 ms, 60 shocks
Random vibration: 3 to 500 MHz @ 1.5 G rms
Storage & transportation
conditions (packaged)
Temperature: –40° C to 70° C (–40° F to 158° F)
Humidity: 10% to 95% relative humidity, non-condensing
Packaged shock (half sine): 180 m/s
2
(18 G), 6 ms, 600 shocks
Packaged sine vibration: 5 to 62 Hz @ velocity 5 mm/s,
62 to 500 Hz @ 0.2 G
Packaged random vibration: 5 to 20 Hz @ 1.0 ASD w/–3 dB/oct.
from 20 to 200 Hz
14 drops minimum on sides & corners @ 42 inches (<15 kg box)
Acoustic noise
(in dBA per ISO 7779)
Summit X150-24t: 45 (high fan speed)
37 (low fan speed)
Summit X150-24p: 44 (high fan speed)
39 (low fan speed)
Summit X150-48t: 45 (high fan speed)
37 (low fan speed)
Table 80: Summit X150 Series Switch Technical Specifications (Continued)