Summit X250e Series Switches
Summit Family Switches Hardware Installation Guide
423
Inrush current 20 A at 48 V , 30 A at V
Power supply cord type DC
Power supply input socket TYCO 206061-1
Power cord input plug TYCO 206060-1
Power cord wall plug None provided
Power supply cord gauge 14 AWG (2.0 mm
2
)
Efficiency 78%
Heat dissipation 31 W (105.8 BTU/hr)
Power consumption (Watts) 31 W (105.8 BTU/hr)
Summit X250e-48t Power
Operational voltage range 90 to 264 V
Nominal input ratings 100 to 240 V , 50/60 Hz, 1.0 A
Input current 0.6 A @ 115 V (low-line)
0.3 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Inrush current 30 A @ 115 V, 60 A @ 230 V
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to “Power Cord Requirements for AC-Powered Switches and
AC Power Supplies” on page 500.
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Efficiency 83% with 60% to 100% load
Heat dissipation (Watts) 51 W (174 BTU/hr)
Power consumption (Watts) 51 W (174 BTU/hr)
Summit X250e-48p Power
Operational voltage range 90 to 264 V
Nominal input ratings 100 to 240 V , 50/60 Hz, 5.5 A
Input current with PoE full load 4.5 A @ 115 V (low-line)
2.25 A @ 230 V (high-line)
Input current without PoE 0.75 A @ 115 V (low-line)
0.5 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Inrush current 30 A @ 115 V, 60 A @ 230 V
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to “Power Cord Requirements for AC-Powered Switches and
AC Power Supplies” on page 500.
Table 81: Summit X250e Series Switch Technical Specifications (Continued)
To Next Page
Loading...
