Appendix B: Technical Specifications
Summit Family Switches Hardware Installation Guide
480
Heat dissipation 323 W, 1,102 BTU/hr
Power consumption 323 W, 1,102 BTU/hr
Summit X670V-48t with VIM4-40G4X Module (AC Power Supply)
Nominal input ratings 100 to 240 V , 50/60 Hz, 4.0 A
Input current 3.5 A @ 100 V (low-line)
1.52 A @ 230 V (high-line)
Heat dissipation 350 W, 1,194 BTU/hr
Power consumption 350 W, 1,194 BTU/hr
Summit X670V-48t with No Installed VIM (DC Power Supply)
Nominal input ratings 48 to 60 V , 8.0 A
Input current 8.4 A @ 40 V (low-line)
5.4 A @ 60 V (high-line)
Heat dissipation 336 W, 1147 BTU/hr
Power consumption 336 W, 1147 BTU/hr
Summit X670V-48t with VIM4-40G4X Module (DC Power Supply)
Nominal input ratings 48 to 60 V , 8.0 A
Input current 9.13 A @ 40 V (low-line)
5.88 A @ 60 V (high-line)
Heat dissipation 365 W, 1,245 BTU/hr
Power consumption 365 W, 1,245 BTU/hr
Safety Standards
North American Safety of ITE UL 60950-1 2nd Ed., 2011-12-19 Listed Device (US)
CSA 22.2 #60950-1-07 2nd Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
European Safety of ITE EN 60950-1:2006 2nd Ed. TUV-R GS
EN 60825-1:2007 (Lasers Safety)
2006/95/EC Low Voltage Directive
International Safety of ITE CB Report & Certificate per IEC 60950-1:2005 2nd Ed.,
+ National Differences
AS/NZX 60950-1 (Australia /New Zealand)
EMI/EMC Standards
North America EMC for ITE FCC CFR 47 part 15 Class A (USA)
ICES-003 Class A (Canada)
European EMC standards EN 55022:2010 Class A
EN 55024:12020
Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11
EN 61000-3-2: 2006+A2:2009 (Harmonics)
EN 61000-3-3:2008 (Flicker)
ETSI EN 300 386: v1.5.1 (2010-10) (EMC Telecommunications)
2004/108/EC EMC Directive
Table 90: Summit X670 Series Switch Technical Specifications (Continued)
To Next Page
Loading...
