Extron electronics MediaLink MLC Plus 50 User Manual

MLC Plus 50/100/200 Series • Introduction 8
• Creates a graphical user interface for use with Extron Control that looks just like the
front panel controls. Using Extron Control you can operate the MLCPlus remotely as if
you were touching the controls on the actual front panel.
• Generates a basic graphical user interface called GlobalViewer (GV) that is uploaded to
the controller (a GlobalViewer host device) along with the completed configuration and
can be accessed as a web page and used to monitor the unit, but not to operate it.
To obtain Global Configurator (GCProfessional, GC Plus) software, you must have an Extron
Insider account and contact an Extron support representative. Extron provides training to
our customers on how to use the software. Access to the features of Global Configurator
Professional is available to users who successfully complete Extron Control Professional
Certification.
PC System Requirements
To find the minimum hardware and software requirements for the PC used to configure the
MLCPlus50/100/200 Series:
• Visit the Download page (www.extron.com/download/index.aspx) on the Extron
website and navigate to the web page for the specific software package (such as Global
Configurator). Minimum system requirements are listed in the description section. In
some cases, minimum device firmware version requirements are also listed there.
• If system requirements are not listed on the software package web page, contact an
Extron support representative.

Extron electronics MediaLink MLC Plus 50 Specifications

General

Brand	Extron electronics
Model	MediaLink MLC Plus 50
Category	Controller
Language	English