Extron electronics MediaLink MLC Plus 50 - About the MLC Plus 50;100;200 Series

MLC Plus 50/100/200 Series • Introduction 2
About the MLCPlus50/100/200Series
The MLCPlus50/100/200Series Controllers integrate Ethernet connection into AV systems
to allow users to remotely control, monitor, and troubleshoot AV equipment. This equipment
includes, but is not limited to, display devices and switchers, source devices, and various
other items such as lights, a projector lift, or a screen motor. They can be used in a
distributed control system environment or as stand-alone controllers.
All models fit standard US junction boxes or mud rings, and all include magnetic faceplates.
The models offer different mounting options and they differ in button or button and knob
arrangements. The buttons and knob can be configured for a variety of functions.
• The MLCPlus50 features six buttons and fits a standard US two-gang junction box or
mud ring.
Figure 1. MLCPlus50 Front (Left), Rear (Middle), and Side (Right) Views
• The MLCPlus100 and MLCPlus100AAP models feature six buttons and a knob.
• The MLCPlus100 fits a standard US two-gang junction box or mud ring.
Figure 2. MLCPlus100 Front (Left), Rear (Middle), and Side (Right) Views
• The MLCPlus100AAP fits a standard US four-gang junction box or mud ring and
includes space to mount from one to four Extron AAP plates.
Figure 3. MLCPlus100AAP Front (Left) and Rear (Right) Views