Extron electronics NBP 100 - Rear and Side Panel Features and Cabling

Network Button Panels • Hardware Features and Installation 15
Rear and Side Panel Features and Cabling
LAN (Ethernet) and PoE connector and LEDs — Connect the unit to a network via this
connector for control and Power over Ethernet. Use the following diagrams as a guide.
Network connection lets you configure the control system and the NBP. For details of
communication protocols, ports, and services used, see the Pro Series Control Product
Network Ports and Licenses Guide, part 68-2961-01, available at www.extron.com.
All NBP one-gang decorator-style models have identical rear panel features.
NBP 200
Rear Panel
e
YYW W-N- L-M
e
YYW W-N- L-M
e
YYW W-N- L-M
e
YYW W-N- L-M
e
NBP 100
Rear Panel
e
e
e
YYW W-N- L-M
e
e
Side View
Side View
Grounding
Screw
LAN/PoE
(Ethernet)
connector
and LEDs
Figure 13. Rear Panel Features — NBP 100, NBP 200
LAN/PoE
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
33-1720-22
B
C
U
S
CAN ICES-3(A)/NMB-3(A)
LISTED
ACCESSORY
I.T.E.
E146728
LAN/PoE
(Ethernet)
connector
and LEDs
MAC Address
Figure 14. Rear Panel Features —
Decorator-style NBPs
LAN/PoE
RJ-45
Connector
NBP Rear Panel
LAN/PoE (Ethernet and
Power Over Ethernet)
Ethernet
NOTE: MAC address information
(00-05-A6-XX-XX-XX) is located
on the rear of each decorator-style
enclosure and on the front of each
US gang enclosure.
PC
Link LED: Lights
green to indicate a
network connection.
Activity LED:
Blinks
amber to
indicate data
is being sent
or received.
TCP/IP
Network
Extron
IPCP Pro
Control
Processor
Connect to an Ethernet network.
This port must be congured.
Default protocol:
• NBP address: 192.168.254.253
• Gateway IP address: 0.0.0.0
• Subnet mask: 255.255.255.0
• DNS address: 127.0.0.1
• DHCP: off
• Link speed and duplex level: autodetected
• Data rates: 10/100Base-T
Power over Ethernet (PoE):
The NBP receives power at this port.
Default login credentials:
• Username: admin
• Password: extron
MAC: 00-05-A6-XX-XX-XX
S/N: XXXXXXX EXXXXXX
00-05-A6-XX-XX-XX
MAC: 00-05-A6-XX-XX-XX
S/N: XXXXXXX EXXXXXX
MAC
Address
Figure 15. LAN/PoE Port Details
Keep the “LAN port defaults”
text set to “no color” (to use
as an invisible text/hyperlink
marker).