Extron electronics ShareLink Pro 500 - Page 44

ShareLink Pro 500 • SIS Configuration and Control 37
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Enable/disable HDMI input
Enable HDMI input
EH1MODE} ModeH X4)]
Disable HDMI input
EH0MODE} ModeH X4)]
View HDMI input setting
EHMODE} X4)]
ModeH X4)]
(Verbose mode 2/3)
Show/hide HDMI client app controls
Show HDMI client app controls
EV1APPC} AppcVX40!]
Hide HDMI client app controls
EV0APPC} AppcVX40!]
View HDMI client app controls setting
EVAPPC} X40!]
AppcVX40!]
(Verbose mode 2/3)
HDMI client app controls label
Set client app HDMI controls label
E1,X4!NI} Nmi1,X4!]
Set label back to default (HDMI)
E1,
•
NI} Nmi1,HDMI]
View client app HDMI controls label
E1NI} X4!]
Nmi1,X4!]
(Verbose mode 2/3)
WebShare
Set WebShare
EXX40@SHAR} SharXX40@]
View WebShare setting
EXSHAR} X40@]
SharXX40@]
(Verbose mode 2/3)
Hide/show IP address in client apps
Hide IP address
EI1APPC} AppcI1]
Mask IP address
Show IP address
EI0APPC} AppcI0]
No IP address mask
Query IP address visibility setting
EIAPPC} X40#]
AppcIX40#]
(Verbose mode 2/3)
KEY:
X4) = HDMI controls setting
0 = Disabled
1 = Enabled (default)
X4! = Client app controls label
UTF-8 characters permitted, maximum of 16 characters
X40! = HDMI client app controls
0 = Hide
1 = Show (default)
X40@ = WebShare mode
0 = Disabled
1 = Enabled (default)
X40# = IP address visibility setting
0 = Masked (default)
1 = Visible