Extron electronics ShareLink Pro 500 - Page 45

ShareLink Pro 500 • SIS Configuration and Control 38
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Access modes
Set access mode
EM X4@SHAR} SharM X4@*X4#]
View access mode
EMSHAR} X4@*X4#]
SharM X4@*X4#]
(Verbose mode 2/3)
Set confirmation-code mode
EM X4$PINC} PincM X4$]
View confirmation-code
mode
EMPINC} X4$]
PincM X4$]
(Verbose mode 2/3)
Set fixed login key code
EV X4%PINC} PincV
•
X4%]
View current login key code
EVPINC} X4%]
PincV
•
X4%]
(Verbose mode 2/3)
Set random code interval
EIX4^PINC} PincIX4^]
View random code interval
EIPINC} X4^]
PincIX4^]
(Verbose mode 2/3)
Set WebView password
option
EM X4&WBSH} WbshM X4&]
View WebView password
option
EMWBSH} X4&]
WbshM X4&]
(Verbose mode 2/3)
Set WebView password
EP<password>WBSH} WbshP]
Set WebView password
back to default
EP
•
WBSH} WbshP****]
Default = WebView
View WebView password
EPWBSH} ****]
]
WbshP****]
If password is not set to default
If password is set to default
(Verbose mode 2/3)
Set password
EPSWD*<username>}
<current password>}
<new password>}
<new password>}
Pswd*<username>]
NOTES:
• The PSWD command must use the carriage return character (hex 0D) and not the pipe character (|) as
delimiters. This allows the pipe character to be part of a password, if desired.
• Password can be up to 128 characters. All human-readable characters are permitted. The password
cannot be a single space. Passwords are case-sensitive.
• The PSWD command will return E35 if the account <username> does not exist.
KEY:
X4@ = Access mode
1 = Full control 2 = Moderated 3 = Run-time (default)
X4# = Run time access mode
1 = Full control 2 = Moderated
X4$ = Confirmation code mode
0 = None 1 = Fixed 2 = Random (default)
X4% = Login key code
Four digit value (default = 0000)
X4^ = Random code interval
Four digit value (1 to 9998) in minutes
Default = 9999 = random code generated after every collaboration session
(after the last user disconnects)
X4& = WebView password option
0 = No access (disabled) 1 = No prompt for password (default)
2 = Custom password 3 = Follow confirmation code