F-SECURE LINUX SECURITY User Manual

CHAPTER G G - 3
Synonym to --virus-action2, deprecated.
--action1-exec=PROGRAM
F-Secure Security Platform runs PROGRAM if the primary action
is set to custom/exec.
--action2-exec=PROGRAM
F-Secure Security Platform runs PROGRAM if the secondary
action is set to custom/exec.
--action-timeout={e,c}
What to do when the scan times out: Treat the timeout as error
(e) or clean (c).
--archive[={on,off,yes,no,1,0}]
Scan files inside archives (default). Archives are still scanned as
normal files with or without this option. See NOTES -section
below about nested archives.
--auto[={on,off,yes,no,1,0}]
Disable action confirmation. Assumes 'Yes' to all enabled
actions.
--avp[={on,off,yes,no,1,0}]
Enable/disable the AVP scanning engine for the scan and the
disinfection. If any engine is enabled, all other engines are dis-
abled (unless explicitly enabled).
--config={file[:PATH]|fsma[:OID]}

F-SECURE LINUX SECURITY Specifications

General

Brand	F-SECURE
Model	LINUX SECURITY
Category	Software
Language	English