There are too many modified files to update with the user interface.
Create a new baseline. Execute the following commands:
/opt/f-secure/fsav/bin/fslistfiles | fsic --add -
fsic --baseline
Do I have to use the same passphrase every time I generate the baseline?
No, you have to verify the baseline using the same passphrase that was used when the baseline
was generated, but you do not have to use the same passphrase again when you generate the
baseline again.
Firewall
Troubleshooting issues with the firewall.
After installing the product, users cannot access samba shares on my computer, how
can I fix this?
The Office firewall profile contains a rule that allows Windows Networking but that rule is disabled
by default. Enable the rule to allow accesses to samba shares.
After intalling the product, I cannot browse local are network domains and workgroups
(SMB). How can I fix this?
You need to add a rule to the firewall that allows browsing Windows shares on your local area
network. Follow these instructions:
1. Go to Firewall ➤ Network Services page in the Web User Interface advanced mode.
2. Click Add new service.
3. Create the following service:
• Service Name: Windows Networking Local Browsing
• Protocol: UDP
• Initiator ports: 137-138
• Responder: >1023
• Description: SMB LAN browsing
F-Secure Linux Security | Troubleshooting | 71