DescriptionProcessModule
Handles the web user
interface.
/opt/f-secure/fsav/tomcat/bin/
catalina.sh start
F-Secure FSAV Web UI
Stores alerts that can be
viewed with the web user
interface.
/opt/f-secure/common/postgresql/bin/
startup.sh
F-Secure FSAV PostgreSQL
daemon
fssetlanguage
You can use the fssetlanguage tool to change the Web User Interface language.
Use the following command to set the language:
/opt/f-secure/fsav/bin/fssetlanguage <language>
Where language is:
• en - english
• ja - japanese
• de - german
fschooser
With fschooser , you can turn certain product features or or off.
You can turn off some product components that you do not need or if you do not have enough
system resources to run them.
1. Run the following command: /opt/f-secure/fsav/sbin/fschooser.
The screen lists security components of the product.
2. Follow the on-screen instructions to turn components or of off.
Firewall - ENABLED, press f+RET to toggle
Web User Interface - ENABLED, press w+RET to toggle
3. Press RETURN to accept your selection.
F-Secure Linux Security | Command Line Tools | 83
To Next Page
Loading...