F-SECURE LINUX SECURITY User Manual

• /etc/opt/f-secure
• /var/opt/f-secure
In addition, the installation creates the following symlinks:
• /usr/bin/fsav -> /opt/f-secure/fssp/bin/fsav
• /usr/bin/fsic -> /opt/f-secure/fsav/bin/fsic
• /usr/bin/fsui -> /opt/f-secure/fsav/bin/fsui
• /usr/share/man/man1/fsav.1 -> /opt/f-secure/fssp/man/fsav.1
• /usr/share/man/man8/fsavd.8 -> /opt/f-secure/fssp/man/fsavd.8
Changed System Files
• /etc/passwd: Two new user accounts (fsma and fsaua) are created during the installation
• /etc/group: A new group (fsc) is created during the installation
• crontab of the root user: The virus definition database update command is added to the root
crontab during the installation. Scheduled scanning tasks are added to the crontab when
they are created.
Network Resources
When running, the product reserves the following IP ports:
CommentPortProtocolInterface
Web User Interface internal communication port28005tcplo
PostgreSQL alert database28078tcplo
Local Web User Interface access28080tcplo
Remote SSL Web User Interface access (if enabled)28082tcpany
Memory
The Web User Interface reserves over 200 MB of memory, but since the WebUI is not used all
the time, the memory is usually swapped out. The other product components sum up to about
128 MB of memory, the on-access scanner uses the majority of it.
The memory consumption depends on the amount of file accesses on the system. If several
users are logged in to the system and all of them access lots of files, the memory consumption
grows.
18 | F-Secure Linux Security | Installation

F-SECURE LINUX SECURITY Specifications

General

Brand	F-SECURE
Model	LINUX SECURITY
Category	Software
Language	English