Explanation of the setting of alkaline / acid cleaning:
If main cleaning stage 1 + 2 , both alkaline and acid detergents s are activated
are used for each cleaning cycle.
If a cycle with acidic detergent is to be carried out after x cleaning cycles with
alkaline detergent , the main cleaning stage 2 must be deactivated. only
Parameter [r21] is used to set the cycle after number of alkaline s, which one
cycle with acid detergent will be carried out.
The is always time-controlled.intake of the detergent
uring dosing he display showD t s:
- ALC - alkaline detergent is dosed
- ACI - acid detergent is dosed
Here you can select whether the detergent is to be dosed in programme step D1
or D2 or in the feed container. Parameter [r20]
6. Cleaning
Cleaning stage
Level 1
Level 2
Level 1
Level 2
Level 1
Level 2
Level 1
Level 2
Cleaning stage 5 Cleaning stage 6
Main rinse 2 Intermediate rinse 2
Cleaning stage 7
Disinfection
Cleaning stage 8
After-rinse
Clean. stg 9
Rinse out
Page 21
To Next Page
Loading...