Fabdec DARI-KOOL GALA-KOOL Pro - Alarm Event Assignment (F parameters)

Working level
for normal daily operation
F parameters
Code: FFFF
Gala-Kool Pro system alarms (only display)
General cooling parameters code: C212
Extended cooling parameters code: D345
General cleaning parameters code: B454
Extended cleaning parameters code: C567
Service parameter s code: EA03
General tank monitor parameters code: 4711
Extended tank monitor parameters code: F94A
Alarm configuration code: FFFF
Configuration code: A384
I/O test parameters code: 10E5
Switch to level
“Alarm configuration”
See section 8.1.
8.9 “Alarm - Event assignment” (F parameters)Level
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
Alarm effect
Informativ tank monitor alarms (green LED)
Critical tank monitor alarms (red LED)
In this level, each fault message F1 to
F61 is assigned the effect of this alarm.
See the table below.
Page 64
8. Setting of parameters