28 < < < <
8. SERVICING
To ensure safety, efficient operation of the appliance, it is necessary to
carry out routine servicing at regular intervals. It is recommended, that the
fire is inspected/serviced by a competent person at least once a year.
Important: Turn off the gas supply before commencing any servicing. Always
test for gas soundness after refitting the appliance.
8.1 Routine annual servicing
1) Clean (if necessary):
• the pilot system;
• the burner;
• the combustion chamber;
• the glass.
2) Check the log lay and replace the embers (if applicable).
3) Do the functional test as described at 6.2.
4) Check the flue system and do a spillage test as described at 6.3.
Note
• The logs contain Refractory Ceramic Fibre which when cut or broken
open can irritate the skin and the respiratory tract. Always wear gloves,
do not blow dust into air.
• Clean up using a vacuum cleaner equipped with a HEPA filter.
• Never place extra elements of any kind into the combustion chamber.
• To guarantee good combustion, the log set may only be installed in the
way specified by Faber International BV. Any other arrangement can lead
to soot on logs or window.
To Next Page
Loading...
Need help?
General
