FX16 Master Controller Technical Bulletin 105
Object List (Cont.) Object
Extension
XT/XP Modules
Gateway Object
System Functions
Clock and Date Set
2
System Resource
Real Time Clock
2
2. Real Time Clock object was replaced by Clock and Date Set object.
Note: The previous versions of these objects are listed for the FX16
as Obsolete and available only for compatibility with older applications.
You can use several objects of the same type within one control
application. Each copy of an object type is called an instance of the
object, and you can configure each instance differently according to the
application requirements. For example, to read the physical inputs AI1
and AI2 on a controller, the control application should include two
instances of the Analog Input object, which differ in their configuration.
One instance is configured to read Channel 1. The other instance should
read Channel 2.
FX CommPro N2/LON
Figure 88: FX CommPro N2 Main Screen
The FX CommPro, available in the N2 Open and LON, commissions
the FX controllers (specifically the FX16 Master Controller).
FX CommPro can display the network profile (input variables, output
variables and parameters) of the connected controller.
Input variables and parameters are read and write parameters; output
variables are for monitoring only.
To Next Page
Loading...
