Facility Explorer FX16 - North American Emissions Compliance

FX16 Master Controller Technical Bulletin 7
179 (7.05)
44 (1.73)
75 (2.95)
215 (8.46)
122 (4.8) 142 (5.59)
35 (1.38)
66 (2.6)
49 (1.93)
BB
Figure 2: Mounting Dimensions for FX16 (Shown with Integral User Display and
Screw Connectors), mm (in.)
Two different types of terminal connectors are available: spring clamp
or screw connectors. The screw connectors are included, whereas you
must order the spring clamp connectors separately. For details, see
Ordering Codes.
North American Emissions Compliance
United States
This equipment has been tested and found to comply with the limits for
a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when this equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user is required
to correct the interference at his/her own expense.
Canada
This Class (A) digital apparatus meets all the requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.