FX16 Master Controller Technical Bulletin
78
Web Server
The FX16 Master Controller features an embedded Web server that
allows a user, running Internet Explorer, to remotely dial in and
establish point-to-point communication with the FX16. Users can
browse alarms, logged data, configuration parameters, and controller
variables if they are included in the Web pages developed at design time
through the dedicated plug-in of FX Builder. You can limit the access to
navigation of the site, which is stored in the controller configuration,
with several levels of user passwords.
Web Configuration
You can configure the Web access via the Application/Notification
Services/Web menu.
When you configure the Web Service, you need to define the
authentication couple data (user identification [UserID] and password)
for each user who connects to the FX16. Multiple users can have the
same authentication data; however, only one user can connect to the
FX16 Master Controller at a time over the PPP connection.
Figure 60: Edit Service: Web Configuration Window
Web Maker
The Web Maker is the FX Builder plug-in dedicated to the design and
development of the Web pages downloadable to the controller.
The World Icon
allows you to open the Web Maker plug-in.
To Next Page
Loading...
