Page 12/13 Operation
Cursor UP [] and Cursor DOWN []
The cursor is moved through the menus with the functions UP [] or DOWN [] shown on
the display. This is how to select the menu items.
RETURN [ ]
The RETURN symbol [ ] has two functions:
• "Confirm"
In the menu selection, you confirm your selection with RETURN [ ] and call up a
submenu.
• "Save and Return"
If you have changed parameters in a menu, you save your entries with RETURN [
]. After saving, the next higher-level menu is automatically displayed.
BACK []
The BACK symbol [] has two functions:
• "Back without selecting"
In the menu selection you can jump back one level up with BACK [].
• "Back without saving"
If you have changed parameters in a menu, you can quit the menu item with BACK
[] without saving the new settings.
6.4.2 Password
In the case of menu items, in which the password must be entered, a key is dis-
played instead of the Enter button.
6.4.3 Switch-on the Backlight
If the backlight is reduced to the set minimum, the lamp button is displayed in
the button function field.
When you press the lamp button, the backlight is switched on again and you can
continue to operate the device.
To Next Page
Loading...
Need help?
General