When the appliance is switched on, the keys on
the electronic thermometers are unlocked.
They lock automatically after 30 seconds of
inactivity.
To unlock the keypad, press SET for several
seconds. When this is pressed, Loc (Locked)
is displayed, when the keypad is unlocked this
changes to UnL (Unlocked).
After unlocking the thermometer keypad, the true temperature continues to
be displayed.
Press SET once and the thermometer enters the temperature range
configuration: the default temperature is displayed and the upper left green
icon flashes.
Use the ˄ and ˅ buttons to increase or lower the nominal heating
temperature configured, within the ranges specified above.
RINSE TEMP (Fig. 12) Boiler: Temp range between 70 ºC and 85 ºC
WASH TEMP (Fig. 12) Tank: Temp range between 50 ºC and 65 ºC
Once the required heating temperature has been configured, confirm the
temperature by pressing SET once. The temperature display again displays
the true temperature and the keypad automatically locks after 30 seconds
of inactivity.
To Next Page
Loading...
