Fargo DTC1000 - Page 15

© 2010 HID Global Corporation All rights reserved
DTC1000/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.2)
15
Technical Specifications
Term Function
Supply Voltage 100-240 VAC, 3.3 A
Supply Frequency 50 Hz / 60 Hz
Warranty Printer – Two years; Printhead – Two years, unlimited pass with
UltraCard™
Encoding Options
Supported
• 125kHz (HID Prox) reader
• 13.56 MHz (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693)
read/write encoder
• Contact Smart Card Encoder reads from and writes to all
ISO7816 1/2/3/4 memory and microprocessor smart cards
(T=0, T=1) as well as synchronous cards
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity,
Tracks 1,2 and 3
Options Single Wire Ethernet and USB 2.0 Interface for inline printing
and encoding
• Single wire Ethernet encoding is only available for iCLASS
and Contact Smart Card encoding)
• Dual-Sided Printing Module – Upgradable
• Dual Input Card Hopper – Upgradable (DTC4000)
• Same-Side Input / Output Card Hopper – Upgradable
(DTC4000)
• Smart Card Encoding (contact / contactless) – Upgradable
• Magnetic Stripe Encoding – Upgradable
• Printer Clearing Kit
Software Swift ID™Embedded Badging Application, FARGO Workbench
Diagnosis Utility
Display Color changing status buttons (DTC1000, DTC4000)
Graphical Display (DTC4000)