Fargo DTC1000 User Manual

© 2010 HID Global Corporation All rights reserved
DTC1000/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.2)
97
Troubleshooting with the Error Message Table
Error Message Cause Solution
# 91
Ribbon Out
The Print Ribbon has run out. Install a new Ribbon.
Press the Pause button to
continue or the ON/OFF
button to cancel.
# 93
Wrong Ribbon
The Print Ribbon installed in
the Printer does not match the
Ribbon type selected in the
Printer Driver.
Change either the installed
Print Ribbon or the Ribbon
type selected in the Printer
Driver.
Press the Pause button to
continue or the ON/OFF
button to cancel.
# 97
Ribbon Search
Error
The Ribbon is not able to find
the next panel correctly.
Check for jams/breaks.
Recalibrate the Ribbon
Sensor.
If broken, repair by taping the
Ribbon back on to the take- up
core.
Replace the Ribbon.
Press the Pause button to
continue or the ON/OFF
button to cancel.

Fargo DTC1000 Specifications

General

Product color	Black, Silver
Internal memory	32 MB
Built-in barcodes	-
Total input capacity	100 sheets
Maximum resolution	300 x 300 DPI
Print speed (color)	120 card/h
Print speed (monochrome)	515 card/h
Compatible operating systems	- Windows XP / Vista (32 bit & 64 bit) / Server 2003 & 2008 / Windows 7 / - Linux
Bundled software	Swift D Embedded Badging Application, ARGO Workbench Diagnosis Utility
Interface	USB
Optional connectivity	Ethernet

Weight and Dimensions

Weight	3400 g
Dimensions (WxDxH)	475 x 234 x 249 mm