Fastjet A400 Series - Multiple User Fields to Generate a Barcode

2.6.5 Multiple user fields to generate a barcode
This function can make multiple user fields (only including clock, counter,
text) to generate one barcode. Generation steps are as follow:
1. Select User Field menu. Select New User Field and press Enter key.
2. Enter a name for the Barcode User Field.
3. Use the Left arrow key and Right arrow key to select Barcode as
the descriptions, and press the Enter key to open Barcode dialog box
(Figure 2-17).
Figure 2-17. Barcode dialog box
4. Press the UP/Down key, when the cursor stays in the content one
to six, press F2 key to insert the needed user field.
5. Press the Enter key to Save and Exit.
 25