Fastjet A400 Series - Page 42

Warning Icons
Icon
Name
Indication
Printer is
running.
Ink jetting is running, printer is ready for
printing.
Printing stops.
Ink jetting stops.
Low ink level
Add ink. Please contact maintenance
engineer if the icon still appears after
adding.
Low solvent
level
Add solvent. Please contact maintenance
engineer if the icon still appears after
adding.
Viscosity fault
Too high or low viscosity. Please report to
maintenance engineer if the display of
the icon exceeds 5 min.
High liquid
level in the
mixing tank.
High liquid level in the mixing tank.
Please report to maintenance engineer if
the display of the icon exceeds 5 min.
Print head cap
is uncapped.
The front cover of the print head cannot
be tightly capped. Inkjet printer
continues running but printing. Please
report to maintenance engineer if the
display of the icon exceeds 5 min. Please
report to maintenance engineer if the
icon still appears after putting on the
front cover of the print head.
Synchronizer
runs too fast.
Synchronizer runs too fast to reach the
width required by printing. Please report
to maintenance engineer if the width of
inkjet printer is disqualified.
Service
Inkjet printer requires maintenance from
maintenance engineer. The printer will
keep running after maintenance.
 39