Preface
Thank you for purchasing our multi-function keypad TP-G1-CLS / TP-G1-ELS.
By installing the multi-function keypad directly on a FRENIC-Lift as an attached keypad or connecting them to-
gether using an optional remote operation extension cable (CB-5S, CB-3S, or CB-1S, depending on the distance),
you can operate the inverter locally or remotely. In either mode, you can run and stop the motor, monitor the
running status, and set the function codes. In addition, you can perform "data copying": You can read function
code data from an inverter, copy (write) it into another inverter, or verify it.
Before installing and using the multi-function keypad, read through this manual in conjunction with the
FRENIC-Lift Instruction Manual (INR-SI47-1038-E) and familiarize yourself with its proper use. Improper use may
prevent normal operation or cause a failure or reduced life of the inverter.
The LCD on the multi-function keypad may display each function code name as “FUNCTION.” For the proper
function code name refer to the FRENIC-Lift Instruction Manual (INR-SI47-1038-E) and the FRENIC-Lift Ref-
erence Manual (INR-SI47-1068-E).
Related Publications
Listed below are other publications on the FRENIC-Lift to be consulted in conjunction with this manual as nec-
essary.
• FRENIC-Lift Instruction Manual (INR-SI47-1038-E)
• FRENIC-Lift Reference Manual (INR-SI47-1068-E)
The materials are subject to change without notice. Be sure to obtain the latest editions for use.
About the ROM version of multi-function keypad
Please read manual (INR-SI47-1056-E) when ROM version of a multi-function keypad is 8510. It might be dif-
ferent from the content of the description of this manual.
Please refer to this Manual 3.4.6 Reading maintenance information Menu #5 "Maintenance Information" for the
confirm method of ROM version of multi-function keypad.
Safety precautions
Read this manual thoroughly before proceeding with installation, connections (wiring), operation, or maintenance
and inspection. Ensure you have sound knowledge of the device and familiarize yourself with all safety infor-
mation and precautions before proceeding to operate the inverter.
Safety precautions are classified into the following two categories in this manual.
Failure to heed the information indicated by this symbol may lead to
dangerous conditions, possibly resulting in death or serious bodily injuries.
Failure to heed the information indicated by this symbol may lead to
dangerous conditions, possibly resulting in minor or light bodily injuries
and/or substantial property damage.
Failure to heed the information contained under the CAUTION title can also result in serious consequences.
These safety precautions are of utmost importance and must be observed at all times.
i
To Next Page
Loading...