FE TP-G1-?LS - Installing the Multi-Function Keypad; Three Ways of Installation;Use

2.2 Installing the Multi-function Keypad
2.2.1 Three ways of installation/use
You can install the multi-function keypad in one of the following three ways:
 Install it directly on the inverter (see Figure 2.1).
 Install it on the front panel of enclosure (see Figure 2.2).
 Use it remotely in your hand (see Figure 2.3).
For FRN□□□LM1S-4□
Figure 2.1 Installing Multi-function Keypad Directly on Inverter
Figure 2.2 Installing Multi-function Keypad on Enclosure Figure 2.3 Using Multi-function Keypad
remotely in Your Hand
2-2