Feasa ICT Series

FEASA LED ANALYSER
ICT VERSION
Capture Sequence Mode
GetSequenceStored## - Get a sequence pattern
Transmit Receive
getsequencestored## OK
Where:
## Represents the Sequence pattern stored previously.
Description
The pattern is identified by a number in the range 00 – 20. Up to 21 patterns can be stored.
This feature allows the user to recall a stored pattern from memory. If you have stored x
different patterns you can recall any one if you know the pattern number.
Example:
getsequencestored05 will recall the sequencecapture number 05.
Back to Index
123