Need help?Do you have a question about the Feelworld L2 PLUS and is the answer not in the manual?
General| HDMI Output Resolution | 1080p60 |
|---|---|
| Power Consumption | 10W |
| Sampling Rate | 48 kHz |
| Bit Depth | 24-bit |
| Power Supply | DC 12V |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | <0.1% |
| Video Input | 4 x HDMI |
| Video Output | HDMI |
| Audio Input | 3.5mm Jack |
| Audio Output | 1 x 3.5mm Stereo |
| HDMI Input Resolution | 720p/50, 720p/60, 1080i/50, 1080i/60, 1080p/50, 1080p/60 |
| Display | LCD |
| Output Channels | 2 |
Navigate menus, switch inputs, and control PGM output using the 5.5-inch touch screen interface.
Access and configure Input, HDMI, USB 3.0, Audio, IP, and general device settings via the main menu.
Access MIX, MODE, PIP, PTZ, LOGO Overlay, and Chroma Key functions through the SW button.
Guide to capturing video with OBS, selecting the device, and setting the video format for streaming.
Configure RTMP URL and Stream Key in OBS settings to connect to streaming broadcast websites.
Steps to add L2 PLUS as input in vMix, select resolution, and configure streaming destination.
Details direct link via network cable, including IP address modification for L2 PLUS and PC.
Steps to modify PC's Ethernet port IP address to ensure smooth communication with the L2 PLUS.
Configure wireless connection by connecting L2 PLUS to router, enabling DHCP, and connecting computer to Wi-Fi.
Overview of software interface, device search, and accessing menus for device control.
Set up and control PTZ cameras, including IP configuration, movement, zoom, and focus.
To Next Page