FENDT Farmer 307 C - After Sales Service; Vehicle Delivery

Vehicle delivery
Vehicle pre-delivery inspection by the Service Workshop
For information, technical date etc. refer to Service Schedule
Check oil level, top up if necessary.
Engine, transmission, final drives, front axle differential hub drives, front PTO, linkage
cross-shaft lubrication. Fill hydraulics with additional oil for external couplers as per customer
requirements.
Check fluid levels, top up if necessary.
Cooling system, brakes, air conditioning if fitted.
Grease vehicle as per Lubrication Chart, lubricate all joints.
Check steering and toe-in. Check tyre pressures. Check wheel nuts for correct torque.
Test electrical system. Show fuses. Check battery charge status.
Fill up with diesel, pre-filter if necessary.
Check brakes for effectiveness.
Information to be given on vehicle delivery
Draw attention to safety instructions within the Operating Manual and on the vehicle
itself.
Point out national regulations with regard to speed and trailer braking systems.
Explain the following features - refer to list of keywords - and show how they are
operated.
Operating controls, start-up hydraulics.
Explain "Important information on after-sales service and maintenance", refer to
inside of back cover.
Hand over tool box accessories.
Fill in guarantee and delivery documents and immediately forward to the
manufacturer.
Vehicle type .............................
Chassis No. ............................. After-Sales Service
Signature of agent . . . . . . . . . . . . . . . . .
Vehicle delivery carried out on . . . . . . . . . . . . . . . .