-26-
Motion detect function
This function is available only if the setting of Motion Detect Enable is selected.
This function should make effective by door station with motion detection.
Follow the steps:
00:10 DS-1
• Detection off: close all motion detections of door station.
• Detection on: activate the motion detect function,the door station motion detection should be
activated individually.
• Detection once: respond motion detect function immediately,the door station motion detec-
tion should be activated individually.
The door station is equipped with a terminal to
connect external motion detector.
If the external motion detector is connected to
the system,following functions will be effective:
If detect someone passing by, the door station
can be activated operation to unlock or turn on
light.
12V
Motion
To Next Page
Loading...
