Festo CECC-X-M1-... 2017-09a English
5
2 Requirements for product use
Make this brief description available to the design engineer, installer
and personnel responsible for commissioning of the machine or sys
tem in which these products are used.
Make sure that the specifications of the documentation are always
complied with. Also consider the documentation for the other com
ponents and modules è 13Technical data.
Take into consideration the legal regulations applicable at the installa
tion site, as well as:
– regulations and standards
– regulations of the testing organisations and insurers
– national specifications
2.1 Training of skilled personnel
The following steps must only be carried out by qualified specialists:
– mounting
– installation
– commissioning
– maintenance
– repair
The trained personnel must be familiar with:
– electrical control technology
– the applicable regulations for operating safety-engineered systems
– the applicable regulations for accident prevention and occupational
safety
To Next Page
Loading...
Need help?
General
