2. Safety instructions for electrical drives and controllers
Festo P.BE-CMMS-AS-HW-EN en 0708NH 13
Do not try to install or commission the motor controller before
you have carefully read through all safety instructions for elec-
tric drives and controllers in this documentation.
You must read through these safety instructions and all other user
instructions before working with the motor controller.
If you do not have any user instructions for the motor controller,
please contact your responsible sales representative.
Request that the operating instructions be sent immediately to
the responsible person so that the motor controller can be op-
erated correctly and safely.
These safety instructions must also be provided if the motor con-
troller is sold, lent and/or passed on to third parties.
For safety and guarantee reasons, the user is not permitted to open
the motor controller.
The prerequisite for faultless functioning of the motor controller is
skilled project planning.
Warning
DANGER !
Incorrect handling of the motor controller and failure to observe the
specified warning instructions, as well as unskilled interference
with the safety devices can lead to damage to property, bodily in-
jury, electric shock or in extreme cases to death.
2.3 Hazards due to improper use
Warning
DANGER !
High electric voltage and high working current!
Danger of death or serious bodily injury due to electric shock!
To Next Page
Loading...
Need help?
General
