Festo CPX-E-CEC Series User Manual

Appropriate software for determining the product version can be found in the Festo Support Portal
èwww.festo.com/sp.
Information on using the software can be found in the integrated Help function.
There may be an updated version of this document for these or later product versions
èwww.festo.com/sp.
1.4 Product labelling
The product labelling is located on the left-hand side of the module. Scanning the printed Data Matrix
Code with an appropriate device opens the Festo Support Portal, with the information appropriate for
the product. Alternatively, the Product Key (11-digit alphanumeric code on the product labelling) can
be entered in the search field of the Support Portal èwww.festo.com/sp.
1
Designation
2
Revision version
3
Data Matrix Code
4
Approvals/warning symbols
5
Pin allocation
6
Product key
7
MAC-ID
8
Part number/serial number
Fig. 1 Product labelling
1.5 Specified standards
Version status
EN60529:2013-10 IEC60204-1:2014-10
EN61000-6-2:2005-08 NE21:2012-05
EN61000-6-4:2007-01
–
Tab. 3 Standards specified in the document
About this document
5Festo — CPX-E-CEC-... — 2018-09

Festo CPX-E-CEC Series Specifications

General

Brand	Festo
Model	CPX-E-CEC Series
Category	Controller
Language	English